Tool holder parts available

Accessories

All tool holders use a very simple and effective design configuration with screw, stirrup and base plate. Each type of insert has its own fixing system and can be identified from the table below.

TOOL HOLDERS

15mm Inserts
DMPN-202015-90
DMPN-202015-75
DMPN-252515-90
DMPN-252515-75
USTC00094
USTC00095

19mm Inserts
DMPN-202019-90
DMPN-202019-75
DMPN-252519-90
DMPN-252519-75

25mm Inserts
DMPN-323225-90
DMPN-323225-75

Options

Neutral, Left, Right
Neutral, Left, Right
Neutral, Left, Right
Neutral, Left, Right
Neutral
Neutral

Neutral, Left, Right
Neutral, Left, Right
Neutral, Left, Right
Neutral, Left, Right

Insert Types

01 ,02, 03 & 05
01, 02 ,03 & 05
01, 02, 03 & 05
01, 02, 03 & 05
Type 05 only
Type 05 only

01 ,02, 03 & 04
01, 02 ,03 & 04
01, 02, 03 & 04
01, 02, 03 & 04

01, 02 & 03
01, 02 & 04

Stirup

PL113
PL113
PL113
PL113
PL113
PL113

PL114 & PL115
PL114 & PL115
PL114 & PL115
PL114 & PL115

PL116
PL116

Screw

V03
V03
V03
V03
V03
V03

V04
V04
V04
V04

V05
V05

Carbide base plate

PSX-315.10 & PSX-315.11
PSX-315.10 & PSX-315.11
PSX-315.10 & PSX-315.11
PSX-315.10 & PSX-315.11
PSX-315.10
PSX-315.10

PSX-319.10, PSX-319.10 & PSX-319.10-03
PSX-319.10, PSX-319.10 & PSX-319.10-03
PSX-319.10, PSX-319.10 & PSX-319.10-03
PSX-319.10, PSX-319.10 & PSX-319.10-03

Notes:

Tool holder part numbers contain shank dimensions, ie: '202015' represents 20mm x 20mm for 15mm inserts.
Carbide base plates are either flat(.10) or curved (.11)
Type 01, 03, 04 & 05 inserts all use flat base plates.
USTC'tool holders are for super positive inserts only.